Two buildings can have the same solar array, the same ENERGY STAR Portfolio Manager (ESPM) profile and two very different emissions totals. The difference comes down to one setting: who owns the Renewable Energy Certificates (RECs).
Green power is one of the configuration issues we find most often when we review ESPM data. It rarely shows up as an error message. ESPM calculates its metrics from whatever is entered, so a building can show a healthy ENERGY STAR score while its emissions miss renewable energy it paid for, or claim credit it no longer owns.
Here is how ESPM treats onsite and offsite green power, where the setup tends to go wrong and what to check before your next reporting cycle.
Onsite solar and wind: the score and the emissions follow different rules
ESPM tracks two kinds of onsite green power, solar and wind. Each gets its own meter, and each asks you to state whether you own the RECs.
For the ENERGY STAR score and source energy, REC ownership does not matter. Onsite renewable electricity avoids the generation, transmission and distribution losses of the grid, so ESPM applies a site-to-source factor of 1.0 to it, compared with 2.80 for grid electricity. The score improves whether you keep the RECs or sell them.
Emissions work differently. A REC is the claim to the environmental attributes of renewable electricity. If you own the RECs, ESPM counts your onsite green power as zero emissions. If you sell them, the buyer owns that claim, so ESPM gives your building no emissions credit for the power. Your totals look as if the electricity came from the grid.
Selling RECs from an onsite system is common and often makes financial sense. It simply means the emissions benefit belongs to someone else, and your ESPM profile should say so.
Offsite green power: visible only in market-based emissions
Offsite green power covers purchases from your utility or a third party, including bundled green power products and unbundled RECs. The electricity your building receives still comes from the grid. So offsite purchases do not change your ENERGY STAR score, your source energy or your Total (Location-Based) Emissions.
They do show up in Total (Market-Based) Emissions. This is the difference between location-based and market-based emissions, the two Scope 2 methods defined by the GHG Protocol. Location-based emissions use the average emissions of the grid where the building sits. Market-based emissions reflect the contractual choices you make about the electricity you buy, and a REC purchase is exactly that kind of choice.
At a glance
What is set up in ESPM | ENERGY STAR score and source EUI | Total (Location-Based) Emissions | Total (Market-Based) Emissions |
|---|---|---|---|
Onsite solar or wind, RECs owned | Improves | Improves (counted as zero emissions) | Improves |
Onsite solar or wind, RECs sold | Improves | No credit | No credit |
Offsite green power or unbundled RECs | No effect | No effect | Improves |
Source: EPA Green Power Technical Reference (August 2024).
Two details are worth knowing. If you sell onsite RECs and buy lower-cost replacement RECs, ESPM reflects the replacements in market-based emissions only. And since August 2024, onsite electricity you export to the grid while keeping the RECs is counted automatically as offsite green power.
Where the setup goes wrong
REC ownership is set once and never revisited. The answer lives in a solar lease, power purchase agreement or REC sale contract, not in ESPM. If the person who set up the meter never saw the contract, the setting is a guess. Contracts change too, and a REC sale can start or end years after installation.
Net metered data is entered as grid electricity. ESPM needs the grid electricity your building used and the onsite generation it consumed as separate flows. EPA names entering the net metered figure as total grid consumption as a common benchmarking error. It understates the building’s real energy use and leaves the solar uncounted.
Offsite purchases never reach the property profile. RECs are often bought at the portfolio level, then never recorded for the properties they cover. Market-based emissions miss them entirely.
Settings get copied forward. When profiles are cloned, migrated or change hands, REC settings travel with them, right or wrong.
Green power is one of five setup errors we cover in our post on ESPM setup errors that quietly skew your numbers.
Why it matters more now
Green power settings flow straight into the numbers you report. ESPM data feeds GRESB submissions, investor reports and, in many jurisdictions, benchmarking and Building Performance Standard filings. As GRESB moves more of its score toward measured energy and GHG performance, an emissions total that misses a building’s entire solar output is no longer a rounding error.
Each program also sets its own rules for what green power counts and how. Before you rely on a REC for a filing, check the primary source for that program.
A quick check for your portfolio
List every property with an onsite solar or wind meter.
For each one, find the agreement that says who owns the RECs and confirm the ESPM setting matches it.
Confirm that onsite generation and grid purchases are entered as separate flows, not one net metered number.
Confirm that offsite green power purchases are recorded for every property they apply to.
Where you buy offsite green power, market-based emissions should come in below location-based. If the two match, the purchase may not be recorded.
How Abisko helps
Abisko syncs with ESPM every night for the 7,000+ properties we support, so REC ownership and green power settings sit in one view next to the energy and emissions data they affect. That makes it easy to see whether your RECs are being properly tracked in ESPM, so you get all the credit you deserve, and to spot the property where they are not.
Who on your team knows the REC terms for your onsite systems, and is it the same person reviewing the configuration in ESPM? If the answer is “not sure,” talk to us.

