Compliance

·

7 min read

Benchmarking Laws Are Training Wheels. In 2027, Several Come Off.

Benchmarking laws are training wheels for BPS. Abisko CEO Rimas Gulbinas on what changes when they come off and the 2027 deadlines to plan for.

Benchmarking laws are training wheels for BPS. Abisko CEO Rimas Gulbinas on what changes when they come off and the 2027 deadlines to plan for.

Portrait of Rimas Gulbinas

Rimas Gulbinas

Chief Executive Officer

Seattle skyline with Mount Rainier in the background

When I sat down with Reid Morgan for The Pulse by GRESB in September, I described benchmarking laws as training wheels for Building Performance Standards (BPS). I still think that is the most useful way to read the policy map in North America.

The market has moved from voluntary disclosure to compliance. Benchmarking laws ask owners to track and report energy, and sometimes water, every year through ENERGY STAR Portfolio Manager (ESPM). They rarely carry real penalties for performance. Their job is to build the habit of tracking data. Once that habit exists, a BPS usually follows, with binding targets and penalties that are hard to ignore.

So when I talk with owners, I put it simply: the data you benchmark today is the baseline you will be measured against tomorrow.

What changes when the training wheels come off

Benchmarking law

Building Performance Standard

What it requires

Track and report energy and water use every year

Meet a performance target by a deadline

Usual tool

ENERGY STAR Portfolio Manager

ENERGY STAR Portfolio Manager, plus program portals

What happens if you fall short

Fines for not reporting, not for poor performance

Penalties tied to how far you miss the target

What it asks of your data

Complete and on time

Complete, on time and defensible, often verified by a third party

The last row is the one I care most about. Under a benchmarking law, a bad ESPM configuration is a reporting problem. Under a BPS, it is a financial one. In one case study I shared on the episode, correcting a single mislabeled property use detail could reduce a building’s annual BPS fine exposure by more than $1 million.

That is why I keep saying ESPM has to be treated as the source of truth. Cities use it for reporting and for penalties, so whatever sits in your profile is what you will be judged on.

The paper trail toward BPS

I watch for the same pattern everywhere: benchmarking first, then a policy process that points toward performance targets. Two places show it right now.

San Diego has required benchmarking for buildings over 50,000 square feet since its 2019 ordinance. The city joined the national Building Performance Standards Coalition in 2022, and its City Planning Department lists an Existing Building Performance Standards Policy with a projected completion in 2026, contingent on funding.

Minnesota started statewide benchmarking for large buildings in the Twin Cities metro and in its larger cities, with buildings of 100,000 square feet and up reporting from 2025 and buildings of 50,000 square feet and up from 2026. A bill to add binding energy performance standards (HF 3179) was heard in the House Energy Finance and Policy Committee in April 2026 and remains in committee.

Neither has a BPS today. If you own buildings in either place, I would treat that as a matter of when, not if.

2027: where several sets of training wheels come off

In jurisdictions that already have a BPS, 2027 is a busy year. These are the milestones I would put on the calendar now.

Jurisdiction

Who it applies to

What is due

When

New York City (LL97)

Buildings with at least one rent-regulated unit and no more than 35% rent-regulated

First annual emissions report, covering calendar year 2026

May 1, 2027

New York City (LL97)

All Article 320 buildings

Calendar year 2026 reports must use ESPM property types

May 1, 2027

Washington State (Tier 1)

Nonresidential buildings of 90,001 to 220,000 sq ft

Clean Buildings Performance Standard compliance report

June 1, 2027

Washington State (Tier 2)

Commercial buildings of 20,000 to 50,000 sq ft and multifamily over 20,000 sq ft

First report: benchmarking, energy management plan and O&M program

July 1, 2027

Seattle (BEPS)

Nonresidential and multifamily buildings over 90,000 sq ft

Benchmarking Verification by a Qualified Person and a GHG Report

October 1, 2027

Montgomery County, MD (BEPS)

Groups 1 and 2: nonresidential buildings over 50,000 sq ft

Interim standard measured on calendar year 2028 performance

Upgrades in place by end of 2027

A few notes on what sits behind those dates:

  • New York. About 4,000 buildings with a small share of rent-regulated units join LL97’s emissions limits for the first time, measured on 2026 data. Every other covered building faces a change too: 2026 is the first year ESPM property types are required for all LL97 limits. Our post on LL97’s second compliance period covers what that means.

  • Washington State. Tier 1 moves to its second size group after the largest buildings reported in June 2026, and Tier 2 buildings file for the first time.

  • Seattle. This is the one I am watching most closely, because it makes independent verification part of the standard. A Qualified Person must verify the previous year’s benchmarking data and document the building’s emissions in a GHG Report, and that person cannot be whoever prepared the annual benchmarking report. Emissions targets follow in 2031 for buildings over 220,000 square feet and in 2032 for those between 90,001 and 220,000.

  • Montgomery County. The interim deadline lands on December 31, 2028, evaluated with the June 1, 2029 benchmarking report. Because compliance is measured on a full year of 2028 energy use, upgrades need to be in place by the end of 2027 to count.

Dates also move, which is why we always go back to the primary source. Denver eliminated its 2027 interim target in 2025, and its interim and final targets for buildings of 25,000 square feet and larger moved to 2028 and 2032.

Compliance and GRESB want the same data

The overlap between these laws and GRESB is bigger than most teams realize. Both ask for energy and water use, location-based emissions, property use and occupancy. The difference is that the laws require reporting through ESPM, so a clean ESPM profile makes both easier.

There is one structural catch I see constantly. Compliance needs whole building meter data, while GRESB reporting often needs data split by sub-meter or tenant. A single ESPM profile cannot report both at the same time, so teams end up keeping two profiles or reconfiguring one over and over. Both paths create errors and extra work.

I also welcome GRESB’s move toward measured building performance in its 2028 Standards. It pushes in the same direction as BPS, and I see GRESB adding a more consistent, global verification layer on top of local policies.

This is a capital planning question, not just a compliance one

Penalty exposure changes the math on energy projects. In one example I gave on the episode, adding avoided penalties to the savings shortened a project’s payback from about five years to about one year. That is a very different conversation with an investment committee.

Investors are already running compliance risk analyses quarterly or semiannually, and many of these policies take effect now or soon. Waiting turns a manageable problem into a much bigger one. On the episode I called it a tsunami, and I meant it.

What I would do now

  1. List every property in a jurisdiction with a 2027 milestone, by size group, so nobody is surprised by which tier a building falls into.

  2. Make ESPM complete and accurate before verification, not during it. Start with property use details, meter structure and green power credits.

  3. Line up an independent Qualified Person early for Seattle buildings.

  4. Put penalty exposure into your capital plans. For Montgomery County, that means knowing your 2028 position while there is still time to act in 2027.

  5. Serve compliance and GRESB from one approach, not two disconnected profiles.

  6. Bookmark the primary source pages for each jurisdiction and check them before every deadline.

How we help at Abisko

We built Abisko around three things: compliance management, investor reporting and integrated decarbonization planning. To stay ahead of evolving regulations, Abisko lets clients track up-to-date details related to deadlines, exemptions, penalties and more for 150+ benchmarking, BPS and audit & tune-up policies across North America. We are a fast way to see what is due and when across a portfolio, and we always route you to the primary source for the final word.

Our ENERGY STAR to GRESB toolkit started in early 2025, when GRESB’s North American team approached us while we were working with EPA on our ENERGY STAR integration. GRESB’s team in Amsterdam reviewed our algorithms and processes, and the toolkit now extends to additional BPS policies, from exposure assessment to compliance pathways and decarbonization planning. With a nightly ESPM sync across the 7,000+ properties we support, the data behind every filing is in view long before the deadline.

Know of another jurisdiction getting ready to take the training wheels off? Tell me. We are always watching for the next one.

Sources

Chicago • Boston • Brasília

Start your journey. Sign up for product updates, upcoming webinars and more!

Copyright © 2026 Abisko | LinkedIn | Terms & Conditions | Security | info@abisko.io

Chicago • Boston • Brasília

Start your journey. Sign up for product updates, upcoming webinars and more!

Copyright © 2026 Abisko

Chicago • Boston • Brasília

Start your journey. Sign up for product updates, upcoming webinars and more!

Copyright © 2026 Abisko | LinkedIn | Terms & Conditions | Security | info@abisko.io